ToriDiili
Kuvagalleria
original merchandise I am selling
(1/6)
Pegasus Ultimate Powerbox v2 control box for telescope peripheries
Myydään
ToriDiili
370 €
Toimitus alkaen 2,99 € + ToriDiili-palvelumaksu 13,25 €
Shoppaile ToriDiilillä kuin verkkokaupassa
ToriDiili on Torin uusi maksu- ja kuljetuspalvelu. Toimituksen jälkeen sinulla on 24 tuntia aikaa tarkastaa tuote ennen kuin rahat siirretään myyjälle.
Tuotteen kuvaus
Kunto: Kuin uusi
Pegasus Ultimate Powerbox v2 including Ultimate Power Box V2 Mini PC Mounting Plate and cigarette Lighter Adapter to DC Power
I used this control unit with my telescope where a mini PC was connected. It in good condition and fully functional.
In addition to the original box items I also included a bracket set to install a miniPC as seen in pone of the pictures (value of the bracket is about 50 euro). Also I included the power cable with cigarette lighter connection to power the unit. The unit does not come with a power cable originally.
Ultimate Powerbox v2 quick glance:
• 4 x 12V Smart Outputs
• 3 x PWM duty cycle channels for Dew Heaters / Flatpanel / Fans
• USB3.1 SuperSpeed, 5 Gbit/s Industrial Grade Powered Hub
Includes 4 x USB3.1 and 2 x USB2 available ports (6 USB ports in total)
• Stepper Motor Controller (Can drive nearly any stepper motor in the astro -market Unipolar or Bipolar)
• Variable / Software Configured 3-12V / Regulated Output of 3Amps
• 12V / Always ON Output for your mini PC
• Environmental & Power readings
• In a compact size with plenty of features!
Industrial 6 port powered USB3.1 SuperSpeed Hub
An industrial-grade USB3.1 Hub controller ensures that this USB hub will work flawlessly from temperatures of -40°C to +80°C.
A neat feature is that each USB port can be switched ON/OFF individually by the software. A device was stuck and you had to replug the socket in the middle of a cold night? No problem! Just locate the port, click the ON /OFF switch in our software and you recycle the USB port. Simple as that!
At the back of the UPBv2 you can locate:
• 4 x USB 3.1 Super Speed ports
• 2 x USB 2 High Speed ports
Each USB port provides up to 2.5Amps. All USB ports include an electronic short circuit and overload electronic protection
4 x 12V DC Power outlets for your equipment
Four powerful Smart Mosfet transistors provide “electric juice” to your precious equipment. Sophisticated short circuit and overload per port protections cut the power and report the incident into our software. Every Mosfet is capable to provide up to 7Amps of current.
Metal & good quality output sockets ensure that will provide all the juice you need and can secure in place your extension power cables
Built-in Power Sensors
A precise voltmeter and an amp meter (can measure up to 20A) measure and display in real-time your power input. If the input is more than 14.5V the power is instantly cut off to protect your equipment.
Individual Current Meter per 12V port and Dew Heaters
Every 12V output and every Dew Heater Channel has an internal and independent digital current meter. You can view each port’s power consumption in the software.
Embedded Stepper Motor Controller
A stepper motor controller will precisely move your focuser. The controller drives a Pegasus Motor or any other stepper motor in the market (Unipolar or Bipolar) e.g. Rigel, Robofocus, Moonlight Motor.
Backlash compensation is already implemented in the firmware and can be enabled, tuned and disabled from the software. A fully ASCOM6 focuser driver is already available.
Supported Stepper Motors
Make sure you have the correct cable for your motor. Every manufacturer uses its own pinout.
Technical Specifications
• Supply Voltage: 12V-14V DC (Reverse Polarity Protected)
• Power Input Connector: XT60 Female
• Connectivity: USB3 – Type B USB Connector
• 4 x 12 Outputs Maximum Current: 6.5A each.
• 2.1mm Center Positive
• Software: ON/OFF
• 3 Channel x 12 PWM Outputs Maximum Current: 6.5A each
• Sensor/ Ampmeter in each port
• Blue Coloured RCA Connector
• Pulse Width Modulated (Suitable for Dew Heaters / Fans / Flatpanel)
• Software: Duty Cycle % / OFF
• 1 x Variable Output Adjustable via software. 3-12V / 3Amps
• 1 x Always ON 12V Output 12V passthrough / Always ON / 8 Amps
• Stock Sensor Input / EXT 0-100% humidity readings with 2-5% accuracy
• -40 to 80°C temperature readings ±0.5°C accuracy
• Ampmeter Measures 0 – 30A
• Voltmeter Measures 5 – 15V
• Superspeed (USB3.1) Industrial 6 port powered Hub Industrial Grade: Temperature range -40°C to +80°C
• 4 x SuperSpeed (USB3.1) ports (backwards compatible with USB2)
• 2 x High Speed (USB2) ports
• USB Ports can be switched ON/OFF on demand via software (data + power)
• Each USB port can deliver up to 2.2Amps
• Stepper Motor Controller Unipolar and Bipolar Stepper motors, max 2.4 Amps (1.2 Amps per phase) – RJ45 socket
• Dimensions Size is 135mm x 107mm x 30mm (new enclosure 2020)
• Weight is 400 grams (14.1 ounces).
This particular unit is a discontinued model but it is still functional and works well. The original price is between 500 and 550 euro (@ www.astro-art.fi and @ www.astroshop.eu)
Huom! Painike, joka näyttää koko kuvauksen on pelkästään visuaalinen.
Käyttäjäprofiili
Kirjaudu sisään, jos haluat nähdä profiilin ja lähettää viestejä.
Kirjaudu sisäänIlmoituksen metatiedot
Viimeksi muokattu: 30.8.2025 klo 20.54 ・ Ilmoituksen tunnus: 29556445
