Kuvagalleria
(1/11)
Technics SL-1200mk3D vinyylisoitin+Technics EPC-205C-IIX äänirasia
Myydään
ToriDiili
990 €
Toimitus alkaen 6,90 € + ToriDiili-palvelumaksu 20 €
Shoppaile ToriDiilillä kuin verkkokaupassa
ToriDiili on Torin uusi maksu- ja kuljetuspalvelu. Toimituksen jälkeen sinulla on 24 tuntia aikaa tarkastaa tuote ennen kuin rahat siirretään myyjälle.
Tuotteen kuvaus
Kunto: Hyvä
Tyyppi: Levysoittimet
Hyvässä kunnossa ja täysin toimiva levysoitin. Äänirasia on hyvässä kunnossa. Japanilainen 100V laite ja muuntaja 230V mukaan.
Technisc EPC-270C äänirasialla hinta 890e.
Commentary
A record player corresponding to the upgraded model of SL-1200MK3.
DD (direct drive) system is adopted for the drive motor.
The rotating part of the motor is integrated with the turntable and the fixed part is integrated with the cabinet. This motor uses an all-round integration type FG. Since the number of revolutions is detected all around, high-precision signal detection is possible. As a result, high rotational accuracy and high starting torque are achieved.
In addition, a pure electronic brake is adopted for the stop mechanism, and the brake is applied quickly and released at the same time as the stop.
Quartz synthesizer system is adopted, and combined with DD motor and all-around detection FG with high signal detection accuracy, accurate rotation is realized.
In addition, it is equipped with continuous pitch control, and it can be used at the desired pitch by setting the quartz lock for fine adjustment of the pitch. This pitch control slider eliminates the center click, and the reset switch enables smooth operation.
The cabinet has a 3-layer structure to prevent vibration from the direct sound pressure of the speaker and external vibration.
The cabinet uses high rigidity aluminum die-cast at the top, integrally molded special heavyweight TNRC (Technics Non-Resonance Compound) at the bottom, special heavyweight rubber at the bottom, and デッドニングゴム at the back of the turntable to improve vibration resistance.
In addition, the use of large insulators suppresses adverse effects from the outside.
The tone arm is made of precision die-cast aluminum to minimize the influence of external vibration. The bearing structure is made of a gimbal suspension combining a high-precision pivot and four bearings. The center of rotation is defined as a single rotation where the vertical rotation axis and the horizontal rotation axis intersect, so that the same excellent initial motion sensitivity is obtained in all directions.
Equipped with an arm height adjustment mechanism with a lock mechanism to minimize vertical tracking error.
Equipped with a pop-up stylus illumination, it can illuminate the needle tip even in a dark room.
Head shell is included.
There are 2 color variations of silver and black.
In order to enhance the operability of DJ, there is no dust cover hinge.
Model Rating
Type Record player
Drive system Direct drive
Control system Quartz control
Number of revolutions 33 1/3, 45 rpm
Rotational speed fine adjustment range ± 8% (continuously variable)
Starting torque 1.5 kg / cm
Wow flutter 0.01% W. R. M.S. (FG Direct Reading)
0.025% W.R.M.S.(JISC5521)
Signal-to-noise ratio 79dB DIN-B(IEC98A weighted)
Tone arm Universal S-shaped static balance gimbal suspension system
Rotational axis sensitivity 7 mg or less (horizontal and vertical initial motion sensitivity)
Arm Height Adjustment Range 6mm
Needle pressure adjustment range 0 ~ 4.0g
Shell mass 7.5g
Applicable Cartridge Mass 3.5g ~ 13g
9.5g ~ 13g (When Using Auxiliary Weight)
3.5g ~ 6.5g (When Using Shell Weight)
Pwer 100 VAC, 50Hz/60Hz
Power consumption 13.5W
External dimensions Width 453x Height 162x Depth 353 mm
Weight 12.0kg
Huom! Painike, joka näyttää koko kuvauksen on pelkästään visuaalinen.
Käyttäjäprofiili
Kirjaudu sisään, jos haluat nähdä profiilin ja lähettää viestejä.
Kirjaudu sisäänIlmoituksen metatiedot
Viimeksi muokattu: 19.12.2025 klo 17.31 ・ Ilmoituksen tunnus: 34720736
