Kuvagalleria
(1/1)
Sailboat Dragon Force 65 V8 PNP
Myydään350 €
Kuvaus
Joysway JW8815V8PNP - Dragon Force DF65 Version 8 Sailboat PNPThe new updated (8:th version) Dragon Force 65 sailboat. The DragonForce 65 has undergone a major transformation to bring the quality and appearance up the high standard set by its bigger brother the DragonFlite 95, without affecting the competitiveness of previous versions. This truly is a stunning and race winning boat - straight out of the box!DF65-V8 Updated items:Servo tray screws are replaced with flat head screwsServo tray is modified with larger the mounting holes & secure the mounted plate with screws from top of servo tray.New switch mounting plate - now sailors can replace the power switch from top of the servo tray, no more disassembly of the servo tray to replace the switchModified dimensions of the black hatch cover patch and battery cover patchNew molded rudder servo arm (reinforced)Improved rudder metal arm, the hole which fit with clevis change from 2mm diameter to 1.9mm diameter, this change will make sure rudder well fitness, minimize the left and right clearance.Two bearing change to 404 stainless steel materialModified mast stub and mast joiner with tube at outer diameter of 4.97mm so to improve the fitness. The whole mast unit will have better curve under tension.Mainsheet Bridle Plate modification - reinforced, thicker & strongerMast deck sliding plate, modified mold?Width from 19.3 to 19.8mm, stop mast deck plate sideways wobble by tighter fit with keel box top moldingMast deck plate positioning nut, change the way to glue it in position well. Prevent nut drop out from keel box.Screws, nuts, washers for the mast deck plate, screws for keel - all change to 316 stainless steelJib boom rear plug, changed design, cord can be thread through outside, easy for change the jib boom lifting cordDF65 sails clew hook 0.6 change to 0.8mmMain sail luff ring, increase the bend on the end to form more of a hook shapeBetter quality forestay steel wire, Shorten the forestay wire length, use thinner copper clamp to clamping the top and bottom wire, prevent wire loop looseAll sail corners, change from one layer patch per side to two layers patches to reinforceChange to better quality elasticated sheeting cordIncluded is the new 2025 winch servo for more accurate sails controlSpecifications:Length: 655 mmBeam: 116.5 mmRig Height: 915 mmOverall Height: 1338 mmRTR weight (no batteries): 1200 gSail Area (main sail): 1460 cm2Sail Area (Jib): 766 cm2Sail Area (Total): 2226 cm2Hull material: Molded ABS with painted white finish and attached stickersIncluded:Fully painted blow molded ABS hull50 micron Mylar film racing sails with printed flow stripe
Huom! Painike, joka näyttää koko kuvauksen on pelkästään visuaalinen.
Lisätietoja
- Kunto
- Uusi
Sijainti
| Ilmoituksen tunnus | 37213239 |
|---|---|
| Viimeksi muokattu | 18.2.2026 klo 14.52 |
